Light foam silicone oil 815H

Categories:

Light foam silicone oil 815H

Generally, silicone oil is a colorless(or pale yellow), odorless, non-toxic and volatile liquid.

Light foam silicone oil 815H

Leticia Industrial Co Ltd  silicone oil 815H is anon-hydrolyzed stabilizer with ultra-highly activity, and a silicone surfactant for the production of polyether type polyurethane oft foam. It is applicable to the technical production of all types of continuous machine foam and box foam with the density of 4-18, as well as that of light and vertical foam and box foam system. Due to the high activity and wide operation scope, it can bring a lot of  economic benefit in the production.

Common silicone oil 850H

Leticia Industrial Co Ltd  silicone oil 850H is anon-hydrolyzed type silicone surfactant. It can be mixed with amine and water in a certain proportion, in which the phenomenon of delamination and emulsification will not be appeared, and the stability is high. The product is suitable for all kinds of foaming system with the density of 8-50. For the product, the activation efficiency of the surfactant is good, by which the hole of sponge form can be even, and the hand feeling is exquisite; by comparing with the same kind of silicone oil, the cell opening property and air permeability are better.

Common silicone oil 856H

Referring for traditional soft mass foam sponge. It can realize relatively good air permeability while maintaining the stability of the foam, and it is suitable for the foaming of the sponge with the density of 12-40. 

New silicone oil 8595H

Leticia Industrial Co Ltd  silicone oil 8595H is an organosilicon surfactant with middle and high activity for the slow rebound of polyurethane soft mass foam and the sponge with medium and high density. It can balance the stability, air permeability, cell structure and density distribution of sponge foam effectively, ad reduce the density difference between up and down of the sponge.

Ultra fine porous silicone oil 858H

Leticia Industrial Co Ltd  silicone oil 858H is anon-hydrolyzed silicone surfactant. In the foaming process of sponge, it has wide processing scope and good stability. The sponge produced with this is featured with small gradient, fine and uniform cell structure, and high productivity. The product is suitable for the foaming of the sponge with the density of 10-55. 

High rebound silicone oil 80366H

Leticia Industrial Co Ltd  silicone oil 80366H is anon-hydrolyzed surfactant, which is suitable for the foaming of high rebound molding foam and high rebound block sponge. Whether using TDI system or TDI/MDI mixed system, the product is featured with special stable cell and wide processing scope. The product is applied to the production of the cushions of some automated cars as well as the foam cushions with low density, short molding time, and easy stripping.

High rebound silicone oil 8070H

Leticia Industrial Co Ltd  silicone oil 8070H is suitable for all kinds of molding high rebound, and featured with very good stability. At the present, the product is widely applied to the production of all kinds of cold polyurethane foam, high rebound car seat, seat cushion,motorcycle seat cushion, bicycle saddle, etc.

Slow rebound silicone oil 8802H

Leticia Industrial Co Ltd  silicone oil 8802H is a non-hydrolyzed surfactant, which is especially suitable for the massive sponge with high requirements on air permeability, low activity, good cell opening property, fine cell, and high width tolerance, and conductive to the processing of the foam with low and medium density.

Slow rebound and closed silicone oil8500H

Leticia Industrial Co Ltd  silicone oil 8500H is specially designed for bloating slow rebound pillow. It can provide excellent operation range, highlight the slow rebound effect of sponge, and it is featured with enough air feeling, good hand feeling and little dosage. 

Shoe silicone oil 893H

Leticia Industrial Co Ltd  silicone oil 893H has good cell stability and good cell structure, and it is widely applied to the foam production of all kinds of sole materials with high density. For the use of general hard foam, it can provide good and stable cell structure and thermal conductivity; moreover, the compatibility to ordinary polyether is good, and the system is more stable due to the non-hydrolyzed chemical structure.

Shoe silicone oil 842H

Leticia Industrial Co Ltd  silicone oil 842H is efficient and non-hydrolyzed silicone oil, which is suitable for the production of all polyester and polyether sole, and featured with good liquidity, good cell opening property and uniform, fine, dense and stable cells and the like.The product is specifically designed for the application in the sole material with low density, it can improve the surface quality of the product, and has better reactivity. The product can effectively improve dimensional stability,and realize good overall effect.

Hard foam silicone oil LET-8525

Leticia Industrial Co Ltd  silicone oil LET-8525 is non-hydrolyzed silicone oil, which is widely applied to refrigerator system,especially designed to stabilize the formulation with high water consumption and low auxiliary foaming agent. The hard foam plastic produced by this product is featured with good thermal conductivity, fine cell, uniform density distribution of the product, strong stability, good liquidity, etc.

Hard foam silicone oil LET-8900

Leticia Industrial Co Ltd  silicone oil LET-8900 is non-hydrolyzed silicone oil, which is widely applied in the system of hard foam board. The product can provide better liquidity for the foam while maintaining the good thermal conductivity and reducing surface cavity. The density distribution of the product is uniform. The product is especially suitable for hydrocarbons,HCFC141B and HFC system. The hard foam plastic produced by this product is featured with strong stability, high compression strength, etc. 

Hard foam silicone oil LET-8600

Leticia Industrial Co Ltd  silicone oil LET-8600 is non-hydrolyzed silicone oil, which is widely applied in pipe and spraying system. It can provide good liquidity and stability of the foaming system, and it is especially suitable for various pipe and spraying systems, to realize uniform cell structure and excellent emulsifying properties of the foam.